No More Green Technologies

Life-Bulb 120V 40W RGB [Switch or Remote Control] LED Pool Light Bulb | Color Changing | Lifetime Replacement Warranty | Replacement Bulb for Pentair and Hayward Fixture | Pool Light for Inground Pools

Shipping calculated at checkout.
Sizing guide
NOTE: This LED pool light is a 120V bulb. It CANNOT be used in a 12V pool light system. If installed in a 12V pool light system the LED pool light will not function properly. Be sure of your pool light voltage before ordering.


  • 120V 40W LED pool light - Most advanced LED quality. 2x brighter than other cheaper LED pool lights.
  • Switch or remote control color-changing options: Turn the switch off/on or use the remote to select color modes. Memory has 7 static modes, 8 animation modes, Including color transition, color fade, color changing
  • New scientific cooling with Aluminum fin heat dissipation brings an extremely long life to the pool light.

Installation and Operation
For details on installation and operation, please visit our instructions page.

This LED pool light is designed to replace incandescent bulbs for Pentair Amerlite 784 Series, Hayward Astrolite SP058 Series swimming pool underwater light fixtures. The color lamp has 14 different color modes: 7 fixed colors, 7 light shows. 7 fixed colors include: red, green, blue, yellow, cyan, purple, white.

Color Memory
When the pool light is turned off, the last color mode will be saved. Next time the pool light is turned on, the previously saved color mode will be displayed.

Remote Control + Switch Control
Press the button on the remote control to directly select the color you want. Color-changing also can be controlled using an ON/OFF switch. Turn the switch OFF/ON (within 2 seconds) multiple times to start cycling through the color mode. When you get to the color you want leave the light on for a few minutes to program that mode into the light.

Important: Remote controls for LED pool lights use a radio frequency (RF) signal to communicate with the receiver inside the light. RF signals are easily interfered by signals in the air such as wi-fi and cell phones. RF signals can transmit through water. However, the signal can still be blocked if the light is inside a metal light fixture.

If you have a metal light fixture, the remote will still be able to communicate with the pool light if it is held next to the existing pool light on/off switch. The reason for this is that the RF signal from the remote actually uses the wiring between the switch and the light to complete the transmission of the signal. For more details, see our remote troubleshooting tips.


Lifetime Replacement Warranty (see warranty page for more details) :

  • First 30 days from purchase: 100% refund
  • After the first 30 days from purchase up to a year: Free replacement (handling fee applies)
  • After 12 months from purchase: Replacement light for 50% off the current purchase price for life.


  • 1 Color-changing LED pool light
  • 1 Remote Controller (Battery type: 23A, not included)
  • Waterproof bag
  • Manual and other goodies


  • Voltage: 120
  • Wattage: 40
  • Base: E26
  • Diameter: 6-5/8"; Length: 5-3/8"
  • Weight: 1 lb.
  • Certificate: FCC, CE, RoHS

Outstanding 24/7 Customer Service