Life-Bulb Smart LED Color Changing Wall Mount Pool Light | Works with Remote or Smartphone App - iOS or Android | Lifetime Replacement Warranty | 75ft Cable | LED pool light for inground pools

We have a vintage concrete pool and the original light finally quit this year. We were having the pool painted and I figured that this would be a good time to check the light. It was completely defunct. I did not want a 120 volt light in the pool any longer and searched for low voltage led lights and found the Life-Bulb Smart Pool LED light. From start to finish, this is one fine piece of engineering. Other than my own errors, I had no trouble installing the light, doing the wiring or setting up the App that you can use to control the light itself. Based on my experience, I do have a bit of advice: When putting on the silicone gasket I found that using electrical tape to secure the gasket to the chrome outer frame of the light saved me a lot of time — After you put on the gasket, you still need to mount the light assembly to the bracket and the gasket may well pop off if it’s not secured. When mounting the light itself, you need to put the light assembly on the hinge at the bottom of the bracket before you mount the bracket in the pool light niche. Then the light assembly can be hinged out while you secure the top of the bracket to the pool light niche. I didn’t do it this way at first! The light bracket has an adjustable plate that’s held fast by two screws. Loosen these to ensure that the bottom of the bracket reaches the bottom of the niche when the top hole of the bracket is lined up with the screw hole in the niche. I don’t know if this is necessary, but I did put a bead of caulk around the outside of the gasket after the light was in place. I also caulked the conduit that runs from the niche to the transformer — I don’t know if this was really needed, but it can’t hurt. The wiring was easy — the low voltage wire is color coded to match the low voltage wiring of the transformer. The proper wire nuts are included — Thanks! I installed the Life-Bulb App on my iPhone and had no trouble pairing the light with my phone’s bluetooth. Once you pair, you can then set up the WiFi connection as well. The app is very intuitive and it’s fun to try out different color schemes. Highly recommend!

The pool light is well made and attractive. The remote control works from inside my home on the second story which is impressive and convenient. The pool light fixture also has an app for a cell. The colors are vivid and bright and change colors automatically which is appealing at night!

Great light with beautiful bright colors and the app works great on your phone. You can set up routines and use various scenes that are already created. We love this light. Very simple to setup and connect.